Remove/install purge control valve

Type ar · thema 47.30 · versie 0101 · 2004-04-15

Geldig voor: ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 1 Motor › 47 Brandstofsysteem, stroomvoorziening aandrijflijn › 47.30 Benzine-verdampingssysteem — Serie 901 (modellen 6**) · Serie 902 (modellen 6**) · Serie 903 (modellen 6**) · Serie 904 (modellen 6**)

EinPAS 16 Brandstoftoevoer/elektrische voeding motor › 16.10 Brandstoftoevoer › 16.10.13 Leiding/slang/klep — Serie 901 (modellen 6**) · Serie 902 (modellen 6**) · Serie 903 (modellen 6**) · Serie 904 (modellen 6**)

Geldt ook voor motoren/versnellingsbakken: 111 984

AR47.30-D-8220A

Remove/install purge control valve

23.8.99

ENGINE 111.984 in MODELS 901.6, 902.6, 903.6, 904.6

D47.30-1102-12

1 Connector

2 Purge control valve

3 Line of switchover valve/idle speed control actuator

4 Line of switchover valve/activated charcoal canister

 	Remove/Install
1	Remove air intake hose		AR09.10-D-8030F
2	Remove the connector (1) at the purge control valve (2)
3	Detach lines (3 and 4) from purge control valve
4	Take off the purge control valve (2) from the bracket in the upward direction	 Installation: While connecting the switchover valve, pay attention to the marking "MOT" on the housing. The arrow must point to the idle speed control actuator.
5	Install in the reverse order