Remove/install brake light switch

AR42.10-S-0045P

Remove/install brake light switch

06.06.2017

Model

470, 471

Shown on model 470

1

Stop lamp switch

3

Electrical connector

2

Bracket

X

Dimension

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Remove driver kneebag

AR91.60-S-0200P

2

Turn brake light switch (1) 45° in counterclockwise direction and pull out of holder (2)

3

Release electrical connector (3), disconnect it and remove brake light switch (1)



Install

4

Plug electrical connector (3) onto brake light switch (1) until it is locked in place

5

Guide brake light switch (1) into holder (2), adjust dimension (X) and turn brake light switch (1) 45° in clockwise direction

 The brake pedal must be in the rear end position.

Distance from housing of brake light switch to contact surface on brake pedal

*BE42.10-N-1002-10P

6

Install driver kneebag

AR91.60-S-0200P

Service brake

Number

Designation

Model 470, 471

BE42.10-N-1002-10P

Distance from housing of brake light switch to contact surface on brake pedal

Dimension "X"

mm

0,74...1,96

For picture, see

AR42.10-S-0045P