Remove/install coupling jaw cross member

Type ar · thema 31.00 · versie 0100 · 2006-08-29

Geldig voor: MODEL 668, 670 with ENGINE 900.917 /918 /919

Niet beschikbaar in “nl”; getoond in Engels.

Plaats

Functiegroep 2 Onderstel › 31 Chassis, gebruik van aanhangwagen › 31.00 Algemeen — Serie 668 · Serie 670 · Serie 900 (modellen 917, 918, 919)

EinPAS 35 Carrosserie/chassis/stylingaccessoires › 35.21 Chassis › 35.21.40 Drager/bevestigingsconsole/versteviging — Serie 668 · Serie 670 · Serie 900 (modellen 917, 918, 919)

EinPAS 35 Carrosserie/chassis/stylingaccessoires › 35.60 Trekhaak/aanhangwagenkoppeling › 35.60.30 Trekhaak/aanhangwagenkoppeling — Serie 668 · Serie 670 · Serie 900 (modellen 917, 918, 919)

AR31.00-D-1000AD

Remove/install coupling jaw cross member

16.8.06

MODEL 668, 670 with ENGINE 900.917 /918 /919

D31.00-0001-11

1 Coupling jaw crossmember

2 Bolt

3 Nut

4 Wiring harness

 	Remove/install
1	Remove front bumper	 Detach connector on the left outside temperature sensor on the bumper.
2	Expose the wiring harness (4) on the coupling head crossmember (1)
3	Remove the coupling head crossmember (1) on the vehicle frame and remove to the front (arrow)		*BA31.00-N-1002-01A
4	Install in the reverse order

Frame, trailer operation, general

Number	Designation		Models 668, 670


BA31.00-N-1002-01A	Coupling jaw crossmember to frame	Nm	111