Remove/install coupling jaw cross member

Type ar · topic 31.00 · version 0100 · 2006-08-29

Applies to: MODEL 668, 670 with ENGINE 900.917 /918 /919

Where it sits

Function group 2 Chassis › 31 Frame, trailer operation › 31.00 General — Series 668 · Series 670 · Series 900 (models 917, 918, 919)

EinPAS 35 Body/frame/detachable parts › 35.21 Frame › 35.21.40 Carrier/mounting bracket/reinforcement — Series 668 · Series 670 · Series 900 (models 917, 918, 919)

EinPAS 35 Body/frame/detachable parts › 35.60 Trailer hitch › 35.60.30 Trailer hitch/trailer coupling — Series 668 · Series 670 · Series 900 (models 917, 918, 919)

AR31.00-D-1000AD

Remove/install coupling jaw cross member

16.8.06

MODEL 668, 670 with ENGINE 900.917 /918 /919

D31.00-0001-11

1 Coupling jaw crossmember

2 Bolt

3 Nut

4 Wiring harness

 	Remove/install
1	Remove front bumper	 Detach connector on the left outside temperature sensor on the bumper.
2	Expose the wiring harness (4) on the coupling head crossmember (1)
3	Remove the coupling head crossmember (1) on the vehicle frame and remove to the front (arrow)		*BA31.00-N-1002-01A
4	Install in the reverse order

Frame, trailer operation, general

Number	Designation		Models 668, 670


BA31.00-N-1002-01A	Coupling jaw crossmember to frame	Nm	111