Adjustment of modulating pressure with non-adjustable cap
Type ar · thema 27.60 · versie 0104 · 1999-08-23
Geldig voor: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979 TRANSMISSION 722.337 in MODEL 903.312 /362 with ENGINE 601.943 with CODE (Z22) Freight delivery service for post office TRANSMISSION 722.332 in MODEL 903.462 /463 with ENGINE 602.980 with CODE (ZB2) Fedex supply
Geldt ook voor motoren/versnellingsbakken: 111 979, 722 330, 722 332, 722 337, 722 375, 722 376
AR27.60-D-1405-01A
Adjustment of modulating pressure with non-adjustable cap
D27.60-0017-01
1 Remove cap on vacuum unit.
D27.60-0018-01
2 Pull adjusting key out of the locking cap until it can be rotated.
One clockwise rotation results in a pressure increase of 0.4 bar One counterclockwise rotation results in a pressure reduction of 0.4 bar To facilitate the work, the modulating pressure can be adjusted at idle speed when the vehicle is stationary
D27.60-0015-01
3 Adjustment process: -Check and record modulating pressure at idle speed when the vehicle is stationary -Check and record modulating pressure (at wide open throttle at 50 km/h) -Compensate the calculated pressure difference when the vehicle is stationary (at idle speed). - After the adjustment process, check the modulating pressure (at wide open throttle at 50 km/h) again and repeat the adjustment process if necessary.
D27.60-0016-01
4 After adjusting, press the cap onto the vacuum unit.
