Automatic transmission - oil and filter change · ap2700p2702ew · Mercedes-Benz WIS

AP27.00-P-2702EW

Automatic transmission - oil and filter change

15.8.11

TRANSMISSION 722.6 in MODEL 204, 207, 212 with ENGINE 271.860

TRANSMISSION 722.6 in MODEL 204 with ENGINE 271.820

Automatic transmission - oil and filter change

P27.00-2230-08

1 Drain screw

2 Sealing ring

5 Oil pan

6 Oil filter

3 Screw

4 Sprag

 	Remove/install
Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
Danger!	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear safety gloves, protective clothing and safety glasses, if necessary.	AS00.00-Z-0002-01A
 Danger!	Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid	Depressurize the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.	AS00.00-Z-0013-01A
1	Move A/T into neutral position and switch off ignition
2	Lift vehicle on lifting platform.
3	Remove bottom engine compartment paneling	Model 207, 212	AR61.20-P-1105EW
		Model 204
4	Remove drain screw (1) and drain ATF	 If transmission oil is burnt or contains wear debris, flush oil cooler lines and oil cooler to prevent subsequent damage to automatic transmission: 
		Flush out oil cooler lines and oil cooler.	AR27.55-P-0001A
		Mobile used oil collector gotis://S_18.1_05.0
		 Installation: Install new sealing ring (2).
			*BA27.10-P-1001-03A
5	Drain ATF from torque converter	Vehicles with drain screw on torque converter	AR27.20-P-0200-03R
		Mobile used oil collector gotis://S_18.1_05.0
			*BA27.20-P-1001-01C
6	Remove bolts (3) and remove oil pan (5)	 Installation: Replace seal and observe correct positioning of sprag (4).
			*BA27.10-P-1002-03A
	Clean
7	Remove permanent magnet from oil pan (5) and clean
8	Replace oil filter (6) with O-ring
9	Install in the reverse order
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
10	Pour in new ATF and correct oil level		AR27.00-P-0100AC

Torque converter

Number	Designation			Trans-mission 722.6 except 722.648


BA27.20-P-1001-01C	Oil drain bolt to torque converter	M8	Nm	10
		M10	Nm	15

 Oil pan, automatic transmission

Number	Designation		Trans-mission 722.6 except 722.628/ 648/649


BA27.10-P-1001-03A	Drain plug on transmission oil pan	Nm	20
BA27.10-P-1002-03A	Bolt, oil pan to transmission housing	Nm	8

Verwezen documenten

ar2700p0100ac
ar2720p020003r
ar2755p0001a Oliekoelerleidingen en oliekoeler spoelen
ar6120p1105ew
as0000z000201a Kans op letsel aan huid en ogen door het omgaan met hete of gloeiende voorwerpen.
as0000z000501a Kans op ongevallen door spontaan wegrijden bij draaiende motor. Kans op letsel door bekneld raken en verbranding bij ingrepen tijdens het starten of bij draaiende motor.
as0000z001001a Levensgevaarlijk is het van de hefbrug glijden of kantelen van de wagen.
as0000z001301a Kans op verbranding van het gelaat en lichaamsdelen door onder hoge druk naar buiten spuitende hydraulische vloeistoffen. Vergiftigingsgevaar door het binnen-krijgen van hydraulische vloeistoffen.