si3500p0005a

Service Information: Repair information on self-locking threaded connections at the axle mounts

유형 si · 주제 35.00 · 버전 0100 · 2008-11-12

적용 대상: MODEL all

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 35 뒷차축 › 35.00 서문 — 시리즈 900 (모델 9**) · 시리즈 902 (모델 9**) · 시리즈 904 (모델 918, 919, 924, 925, 938, 943, 957) · 시리즈 906 (모델 917, 918, 924, 953)

EinPAS 17 드라이브 트레인/액슬 › 17.51 뒤차축 › 17.51.30 뒤차축 전체 — 시리즈 900 (모델 9**) · 시리즈 902 (모델 9**) · 시리즈 904 (모델 918, 919, 924, 925, 938, 943, 957) · 시리즈 906 (모델 917, 918, 924, 953)

EinPAS 45 데이터/정보 › 45.20 정보/조치 › 45.20.20 서비스 정보 — 시리즈 900 (모델 9**) · 시리즈 902 (모델 9**) · 시리즈 904 (모델 918, 919, 924, 925, 938, 943, 957) · 시리즈 906 (모델 917, 918, 924, 953)

엔진/변속기에도 적용: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI35.00-P-0005A

Service Information: Repair information on self-locking threaded connections at the axle mounts

10.11.08

MODEL all

Service Information: Repair information on self-locking threaded connections at the axle mounts

P00.00-4397-11

Thread

Service Information: Repair information on self-locking threaded connections at the axle mounts

P00.00-4398-11

Thread cutters

Due to recent events, we again point out the importance of properly handling self-locking threaded connections.

In order to avoid consequential damage, self-locking screws/bolts (with microencapsulation) must ALWAYS be replaced. As described in the repair instructions, it is mandatory that the nut threads on the axle mount be recut and blown out with compressed air.

This is absolutely essential because adhesive residues in the thread make it impossible to achieve the required bolt prestress level, even if the specified tightening torque or angle is applied.

Failure to follow these instructions will result in insufficient prestress and the bolt will experience bending stress that could lead to breakage and great consequential damage.

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

참조 문서