P97.10-0223-06
Detachable body parts
1 Engine hood
2 Trunk lid
3 Driver's door, rear
4 Driver's door, front
P97.10-0202-06
5 Window shaft, rear door
6 Rear door, front
7 Rear door, rear
P97.10-0224-06
Front end
8 Longitudinal member/engine compartment
9 Engine support
10 Wheelhouse/engine compartment
11 Firewall
12 Firewall
13 Wheelhouse/engine compartment
14 Outer wheelhouse
15 Longitudinal member/wheelhouse
16 Firewall/wheelhouse
P97.10-0225-06
Passenger compartment
17 Inner longitudinal member at cross member below rear seat
18 Inner A-pillar
19 Inner floor system
20 Inner tunnel
21 Cross member below windshield
22 Rear door hinge on B-pillar
P97.10-0211-06
Rear area
23 Left inner rear floor
Arrow: Bumper mount recess
24 Right inner rear floor,
Arrow: recess between longitudinal member and fender
24a Rear floor cross member-spare wheel recess
P97.10-0205-06
25 Rear fender-rear wall
26 Rear center section
27 Outer right rear floor
28 Tank recess
29 Roof
P97.10-0226-06
Floor
30 Front floor system to front end and to firewall
P97.10-0208-06
31 Center/rear floor system below rear seat
P97.10-0209-06
32 Floor system in rear with wheelhouse
Figure item, etc. | Work instructions | ||
Danger! | Vapors and gases from the solvent represent an explosion and poisoning hazard. Injury hazard to skin and eyes when working on corrosion protection agents. | Do not spray corrosion protection agent into open flames or flowing bodies and keep away from fire. Process in well-ventilated rooms, wear respiratory protection. | |
| After completing repairs at the body, the weld seams should be sealed on both sides | Sealant | |
Processing instructions | |||
| Service Information sprayable seam seal | ||
| When replacing detachable body components such as doors, engine hood, trunk lid etc. also seal seams and beads. | Do not apply sealant on bare metal, first prime welds, etc., corrosion hazard. | |
| Depending on the scope of repair various sealing measures may be required except for the points mentioned. |
참조 문서
- ar9710p050002a 도장하기 전에 차체용 실링제(도장 덧칠)를 처리하십시오.
- as9700z000101a 솔벤트 증기 및 가스에 의한 폭발 위험과 중독 위험 부식 방지제를 취급할 때 입을 수 있는 안구와 피부의 상해 위험
- si9710p0001a 서비스 정보: 분무식 심실링