ar9160d0680a

Remove/install passenger airbag unit

유형 ar · 주제 91.60 · 버전 0107 · 2019-07-24

적용 대상: Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 with code SA6 (Airbag, co-driver)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 91 시트, 카우치, 보호장치 › 91.60 에어백, 보행자 보호 — 시리즈 901 (모델 0**, 3**, 4**) · 시리즈 902 (모델 0**, 3**, 4**) · 시리즈 903 (모델 0**, 3**, 4**) · 시리즈 904 (모델 0**, 3**, 4**)

EinPAS 27 수동형 안전/시트 안전 시스템 › 27.16 에어백 › 27.16.20 에어백 — 시리즈 901 (모델 0**, 3**, 4**) · 시리즈 902 (모델 0**, 3**, 4**) · 시리즈 903 (모델 0**, 3**, 4**) · 시리즈 904 (모델 0**, 3**, 4**)

AR91.60-D-0680A

Remove/install passenger airbag unit

23.07.2019

Model

901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

with code SA6 (Airbag, co-driver)

Modification notes

25.07.2013

"Disconnect battery" removed, "Remove ignition key", inserted

Operation step 1

25.07.2013

"Check airbag system", inserted

Operation steps 9, 10

Remove/install passenger airbag unit

1

Stowage box/tray

2

Screw

3

Speaker cover

4

Front passenger airbag

5

Screw

6

Airbag cable

7

Connector

8

Cable tie

D91.60-1132-06

Remove/install

Warning

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01D

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Topical note

Notes on performing repair, body work and welding on vehicles with airbags and RTE units

AH91.00-P-0002-01M

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

Assessment of airbag and belt tensioner units in accident vehicles

AH91.00-P-0006-01B

1

Remove ignition key from ignition lock

2

Remove passenger side speaker cover (3)

3

Open cable tie (8) or airbag cable (6) (BK/GY) in the front passenger footwell under the instrument panel and expose airbag cable (6)

4

Unscrew screw/bolt (2) and unclip stowage box/tray (1) all around, lift slightly from left and remove to the left

In order to prevent scratching of the instrument panel, mask off surface in front of stowage box/tray (1) with masking tape.

Long wedge

*115589035900

5

Remove screw/bolt/bolts (5)

Installation: Replace screw/bolts (5).

Bolt, front passenger airbag to bracket

*BA91.60-N-1003-01A

6

Remove front passenger airbag (4) from the bracket a little until connector (7) on the left side is visible

Installation: Guide of bracket (A) must sit in the guide slot of airbag unit (B).

7

Disconnect connector (7) from squib at gas generator

When replacing the front passenger airbag (4), ensure proper and environmentally friendly disposal.

8

Install in the reverse order

9

Connect diagnostic system and perform quick test

10

Read out fault memory of airbag (AB) system and delete fault memory

Airbag

Number

Designation

Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4

BA91.60-N-1003-01A

Bolt, front passenger airbag to bracket

Nm

10 (1)

Remove/install passenger airbag unit

115 589 03 59 00

Long wedge

참조 문서