ar8370d5758d

Remove/install glow plug

유형 ar · 주제 83.70 · 버전 0103 · 2003-09-29

적용 대상: MODELS 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater B3L-C compact heater MODELS 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater D3L-C compact heater MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater B3L-C compact heater MODELS 901.66# /67#, 902.66# /6

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 83 에어컨 › 83.70 보조히터, 추가히터, 추가히터 — 시리즈 901 (모델 06*, 36*, 37*, 46*, 66*, 67*) · 시리즈 902 (모델 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · 시리즈 903 (모델 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · 시리즈 904 (모델 06*, 36*, 46*, 66*)

EinPAS 39 히터/환기/에어컨 › 39.25 독립식 히터/보조 히터 › 39.25.30 히터 — 시리즈 901 (모델 06*, 36*, 37*, 46*, 66*, 67*) · 시리즈 902 (모델 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · 시리즈 903 (모델 06*, 07*, 36*, 37*, 46*, 47*, 66*, 67*) · 시리즈 904 (모델 06*, 36*, 46*, 66*)

AR83.70-D-5758D

Remove/install glow plug

10.9.97

MODELS 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
B3L-C compact heater

MODELS 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
B3L-C compact heater

MODELS 901.66# /67#, 902.66# /67#, 903.66# /67#, 904.66# ## up to 382001 up to 3/11/02 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

MODELS WD1##, WD2##, WD3##, WD6##, WD7## ### up to 382001 up to 11.3.02 with CODE (H11) Warm air auxiliary heater
D3L-C compact heater

Remove/install glow plug

D83.70-1305-06

1 Seal

2 Cover

3 Bolt

4 Nut

5 Glow plug connection line

6 Glow plug

7 Sealing ring

8 Glow plug screen

9 Access plate

10 Bolt

11 Auxiliary heating control unit

12 14-pin plug

Remove/Install

1

Remove heater unit

Models 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4 as of 753731 as of 03.11.97

AR83.70-D-5302G

Models 901.6, 902.6, 903.6, 904.6,

WD1, WD2, WD3, WD6, WD7 up to 382001 up to 11.03.02

AR83.70-D-5302K

2

Detach access plate (9)

3

Unscrew bolt (3) and remove cover (2) with gasket (1)

Installation: Check gasket (1) for damage and replace if necessary.

4

Disconnect 14-pin plug (12) from auxiliary heater control unit (11).

5

Unscrew nut (4)

6

Remove connection lines (5) from the glow plug (6)

7

Unscrew glow plug (6)

8

Remove sealing ring (7)

Installation: Replace seal (7).

9

Remove glow plug screen (8)

Installation:

D3L-C compact heater (Diesel):

Note the installation position of the guide lug (arrow A). The bore for glow plug ventilation (arrow B) must be unobstructed

B3L-C compact heater (gasoline):

Note installation position of parting joint on glow plug screen (arrow C) The bore for the glow plug ventilation (arrow D) must be unobstructed.

10

Install in the reverse order

참조 문서