AR83.55-P-5300RT | Remove/install refrigerant compressor | 26.7.07 |
ENGINE 113.971, 272.967, 642.950, 156.980 in MODEL 251
with CODE (580) Automatic air conditioning
with CODE (581) Comfort automatic air conditioning
with CODE (582) Rear air conditioner
P83.55-2131-08
Shown on engine 272.967
1 Air intake hose
2 Screw
3 Refrigerant pressure line
A9 Refrigerant compressor
A9x1 Refrigerant compressor connector
4 Screw
5 Refrigerant suction line
6 Bolts
| Remove/install | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
Danger! | Risk of explosion caused by welding or soldering work on closed air conditioning system. Risk of poisoning caused by inhaling overheated refrigerant vapors. Risk of injury to skin and eyes caused by contact with liquid refrigerant. | Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated areas. Carry out repair work on the air conditioning system circuit only after the system has been discharged. | |
| Procedure for a damaged or leaky air conditioning system | All models | |
| Protect air conditioning circuit and components from moisture when carrying out repair work | All models with air conditioning | |
| Notes on handling refrigerant R134a | Air conditioning with refrigerant R134a | |
1 | Discharge air conditioning system | ||
2 | Remove partition wall between wheelhouses | Engine 642.950 | |
3 | Remove engine trim panel | Engine 642.950 | |
4 | Detach air intake hose (1) | Only on left side. | |
5 | Remove poly-V belt | Engine 113.971 | |
Engine 272.967 | |||
Engine 156.980 | |||
Engine 642.950 | |||
6 | Disconnect refrigerant compressor connector (A9x1) | ||
7 | Unscrew bolt (2) | | |
8 | Remove refrigerant pressure line (3) and place out of working area | Installation: Replace sealing rings of refrigerant pressure line (3) and moisten with compressor oil. | |
9 | Unscrew bolt (4) | | |
10 | Detach refrigerant suction line (5) and place out of working area | Installation: Replace sealing rings of refrigerant suction line (5) and moisten with compressor oil. | |
11 | Seal openings of refrigerant pressure line (3) and refrigerant suction line (5) using suitable plugs and stop plugs | The openings of the refrigerant pressure line (3) and refrigerant suction line (5) must be sealed, as otherwise any penetrating dirt and moisture can damage components connected to the refrigerant circuit. | |
12.1 | Detach lower engine compartment paneling | Motor 113.971, 272.967, 156.980 | |
12.2 | Remove bottom section of soundproofing | Engine 642.950 | |
13 | Remove bolts (6) | | |
14 | Remove refrigerant compressor (A9) | Remove refrigerant compressor (A9) downwards Place refrigerant pressure line (3) and refrigerant suction line (5) to one side. | |
15 | Install in the reverse order | ||
16 | Refill air conditioning system and inspect for leaks and proper operation. | ||
17 | Perform a function test |
Refrigerant compressor
참조 문서
- ah8330n000301a 냉매 R134a 취급 관련 지침
- ah8330n000401a 에어컨이 파손되었거나 누출이 있을 경우의 조치
- ah8330n000501a 정비 작업 시 에어컨의 회로와 부품들을 습기로부터 보호하십시오.
- ar1320p0001gza 벨트 드라이브 부품의 탈, 장착
- ar1320p0001gzb 벨트 드라이브의 부품 탈, 장착
- ar1322p1202gzs 벨트 탈, 장착
- ar1322p1202rt
- ar6120p1105rt
- ar6230p2400rt
- ar8330p1760rt
- ar9430p5300rt
- as0000z001001a 리프터에서 차량이 미끄러지거나 틸팅 시 생명의 위험
- as8300z000101a 밀폐된 에어컨에서 용접 작업이나 납땜 작업을 실행할 경우 발생할 수 있는 폭발 위험 과열된 냉매 증기의 흡입으로 인한 중독 위험 액체형 냉매와의 피부 및 안구 접촉에 의한 상�