Remove/install water collector

AR83.25-P-1402Q

Remove/install water collector

29.11.01

 

Remove/Install

Danger!

Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove wiper arm on both sides

AR82.30-P-6100Q

2

Move engine hood to upright position

AR88.40-P-1000Q

3

Remove paneling on the outside of A-pillar on both sides

 Loosen only around the water collector (7).

4

Remove trim panel (1) on left side

5

Remove line (2a) with bracket (2)

6.1

Remove line (3a) from bracket

Engines 112, 113, 612

7

Remove screws (4).

8

Pull off water drain hoses (5)

9

Remove seals (6)

10

Press water collector (7) off the windshield frame



*110589035900

11.1

Remove water collector (7) upwards and rotate

For CODE (581b) comfort automatic air conditioning

 Removal: Do not remove coupling for C-AAC multifunction sensor (B31).

 Installation: Check and if necessary correct installation position of water drain hose (8).

11.2

Remove water collector (7) from vehicle

Except CODE (581b) comfort automatic air conditioning

 Installation: Check and if necessary correct installation position of water drain hose (8).

12.1

Unscrew screws (9)

For CODE (581b) comfort automatic air conditioning

13.1

Remove C-AAC multifunction sensor (B31)

For CODE (581b) comfort automatic air conditioning

14.1

Remove water collector (7) from vehicle

For CODE (581b) comfort automatic air conditioning

15

Install in the reverse order