P82.30-2513-06
Shown on model 251 with engine 272
1 Passenger-side wiper arm
2 Driver-side wiper arm
3 Cover
4 Nut
5 Nuts
Modification notes
| Remove/install | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases even sever extremities. | Always remove ignition key when working on windshield wiper mechanism. | |
| Installation: Information on aligning wiper arms | See: | |
Check wiper arms and adjust | |||
1 | Move the wiper arms into park position and switch off the wiper system | ||
2 | Switch off ignition and remove the transmitter key from the EZS control unit | On vehicles with code (889) Keyless Go: Press keyless go start/stop button repeatedly until ignition is switched off. Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m). | |
3 | Open engine hood and raise to vertical position | ||
4 | Raise cover (3) on driver side wiper arm (2) | When removing driver side wiper arm (2). | |
5 | Unscrew nut (4) and loosen driver side wiper arm (2) drive shaft and remove | When removing driver side wiper arm (2). | |
Carefully remove driver side wiper arm (2) to prevent damaging paint on engine hood. | |||
The wiper arm should not spring back on the windshield to prevent damage. | |||
| |||
6 | Unscrew nut (5) on passenger side wiper arm (1) | When removing passenger side wiper arm (1). | |
| |||
7 | Loosen passenger side wiper arm (1) from wiper drive shaft and remove | When removing passenger side wiper arm (1). | |
Carefully remove passenger side wiper arm (1) to prevent damaging paint on engine hood. | |||
The wiper arm should not spring back on the windshield to prevent damage. | |||
8 | Install in the reverse order | ||
9 | Check wiper arms and adjust | ||
10 | Carry out function check |
Windshield wiper
참조 문서
- ap8230p8252rt 와이퍼, 윈도우 워셔 시스템, 전조등 워셔 기능 점검
- ar8230p6000rt 와이퍼 암 점검 및 조정
- ar8840p1000rt 엔진 후드 열기, 수직으로 세우기, 닫기
- as8230z000101a 끼임 또는 짓눌림에 의한 상해 위험, 극단적인 경우 와이퍼 기계 장치에 손발이 절단되는 상해 위험