ar8230d6285a

Remove/install rain sensor control module

유형 ar · 주제 82.30 · 버전 0102 · 2003-09-15

적용 대상: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 82 전기적 장치, 구조 › 82.30 윈도우　와이퍼 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

EinPAS 36 보기(View) › 36.30 와이퍼/세척 › 36.30.11 컨트롤 유닛/릴레이 — 시리즈 901 (모델 6**) · 시리즈 902 (모델 6**) · 시리즈 903 (모델 6**) · 시리즈 904 (모델 6**) · 시리즈 905 (모델 6**)

AR82.30-D-6285A

Remove/install rain sensor control module

27.9.02

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM1) Clear heatable windshield with rain sensor

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (FM2) Tinted heatable windshield with rain sensor

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (FM2) Tinted heatable windshield with rain sensor

Remove/install rain sensor control module

1 Tie strap

2 Plug-in wiring plug connection

3 Nut

4 Screw

5 Control module

D82.30-0019-03

Remove/install

1

Use a knife to cut through tie straps (1) on control module (5)

2

Unlock and disconnect electrical connector (2) on control module (5)

3

Unscrew both nuts (3) and remove control module

4

Install in the reverse order

5

Perform function check