ar7720p2500rt

Remove/install wind deflector

유형 ar · 주제 77.20 · 버전 0100 · 2005-05-10

적용 대상: MODEL 251 with CODE (414) Power glass tilting/sliding roof

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 77 선루프, 폴딩루프, 탑 › 77.20 선루프 전기장치 — 시리즈 251

EinPAS 38 루프 시스템 › 38.15 슬라이딩 루프/파노라마 슬라이딩 루프 › 38.15.33 패널/슬라이딩 루프 커버 — 시리즈 251

AR77.20-P-2500RT

Remove/install wind deflector

25.10.04

MODEL 251 with CODE (414) Power glass tilting/sliding roof

Remove/install wind deflector

P77.20-2533-05

1 Wind deflector

2 Bolts

3 Wind deflector guide

4 Retaining lug

Remove/Install

Danger!

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

When moving components, ensure that no body parts or limbs are within the operating range of moving parts.

AS00.00-Z-0011-01A

1

Completely open tilting/sliding roof

2

Slacken screws (2)

Left and right side

Installation: Check whether wind deflector guide (3) is seated correctly on both sides

3

Slide wind deflector guide (3) toward rear

Left and right side

4

Remove wind deflector (1)

Carefully remove wind deflector (1) to prevent damaging paint

5

Install in the reverse order

Installation: Clip retaining lug (4) into wind deflector guide (3) (arrow)

6

Perform a function test

참조 문서