ar7720p2500rt

Remove/install wind deflector

Type ar · topic 77.20 · version 0100 · 2005-05-10

Applies to: MODEL 251 with CODE (414) Power glass tilting/sliding roof

Where it sits

Function group 3 Body › 77 Sliding roof, soft top, top attachments › 77.20 Electric sliding roof — Series 251

EinPAS 38 Roof system › 38.15 Sliding roof/panoramic sliding sunroof › 38.15.33 Paneling/sliding roof panel — Series 251

AR77.20-P-2500RT

Remove/install wind deflector

25.10.04

MODEL 251 with CODE (414) Power glass tilting/sliding roof

Remove/install wind deflector

P77.20-2533-05

1 Wind deflector

2 Bolts

3 Wind deflector guide

4 Retaining lug

 	Remove/Install
 Danger!	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	When moving components, ensure that no body parts or limbs are within the operating range of moving parts.	AS00.00-Z-0011-01A
1	Completely open tilting/sliding roof
2	Slacken screws (2)	 Left and right side
		 Installation: Check whether wind deflector guide (3) is seated correctly on both sides
3	Slide wind deflector guide (3) toward rear	 Left and right side
4	Remove wind deflector (1)	 Carefully remove wind deflector (1) to prevent damaging paint
5	Install in the reverse order	 Installation: Clip retaining lug (4) into wind deflector guide (3) (arrow)
6	Perform a function test

Referenced documents

as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.