P72.12-2043-06
1 Screw
2 Lock cover plate
3 Handle recess
4 Screw
5 Cover
6 Screw
8 Door liner
9 Clips
10 Installation wedge
11 SRS cover (with code 293 rear side airbag)
12 Screw (with code 293 rear side airbag)
P72.12-2044-01
13 Clip
14 Control cable (interior door control)
Modification notes
29.7.98 | Cover and screw added on vehicles with SRS (side airbag) | Work step 3 | |
Clip for fixing control cable for interior door control added for the first time | Work step 9 | ||
Screw on lower door lining (rear entrance lamp) no longer used | was work step 7 |
| Removing, installing | ||
1 | Press off handle recess (3) using assembly wedge. | | |
2 | Unscrew screw (4) in the area of the interior door control | ||
3 | Unclip cover (11) and unscrew screw (12) | With code 293 (rear side airbag) | |
4 | Unscrew screw (1) on lock escutcheon (2) and remove lock escutcheon (2) downwards | ||
5 | Press off cover (5) under armrest and unscrew screw (6) | ||
6 | Unclip entrance lamp and disconnect electrical cable | ||
7 | Press door lining (8) off inner door panel at bottom, front and rear using assembly wedge | Guide each assembly wedge straight to the clips. | |
8 | Lift door lining (8) out of retaining clips at the top of the sealing rail using assembly wedge and at the same time pull away from the inner door panel | | |
9 | Unhook control cable (14) on interior door control | Installation: Ensure that the control cable (14) is clipped into the retaining clip (13) | |
10 | Pull electrical connections off door lining (8) | ||
11 | Put down door lining (8) | ||
12 | Check film and clips on inner door panel and replace if necessary. | Stick door film onto inner door panel. | |
13 | Check clips (9) on door lining and replace if necessary | ||
14 | Install in reverse order |
110 589 03 59 00
Assembly wedge
Repair materials
Number | Designation | Order number |
BR00.45-Z-1004-02A | Adhesive PVC 914 | A 001 989 30 71 |