Adjust rear door

AR72.12-P-0650E

Adjust rear door

28.1.09

Adjust

1

Remove striker eye

2

Check gap dimensions at door all the way around



 Gap dimensions at hoods, doors and covers

*129589032100

Model 202.01/02/12

AR60.00-P-0700-01E

Model 202.07/08/18

AR60.00-P-0700-01EA

3

Loosen bolts (10) on B-pillar, tighten and adjust by moving rear door, adjust gaps



 After adjustment seal rear door hinge on B-pillar

*BA72.12-P-1001-01A

Seam sealing following repair

AR97.10-P-4000E

4

Loosen bolts (11), tighten and adjust contour on hinge side by moving rear door



Door paneling (D) should be flush with driver door contour or should be located max. 1 mm deeper

*BA72.12-P-1001-01A

5

Bolt on striker eye

 Do not tighten

6

Close rear door completely and adjust contour of striker eye by moving striker eye

Door paneling (E) should be flush with contour of rear fender or should extend max. 1 mm

7

Tighten striker eye



*BA72.12-P-1003-01A

8

Check contour and fit on window frame (F) to roof paneling and rear pillar, adjust if necessary.

The outer lip of the door frame seal should be flush with the edge of the roof paneling.

9

Check rear door for easy motion

Number

Designation

Model 202.01/02/033/
12/13

Models
202.07/08/093/
18/19

BE60.00-P-1002-01A

Gap dimension

Front door to A-pillar

Dimension "B"

mm

6.0 (+1)

6.0 (+1)

Front door to fender

Dimension "H"

mm

5.0 (+1)

5.0 (+1)

Front door to rear door

Dimension "I"

mm

6.0 (+1)

6.0 (+1)

Front door to roof

Dimension "C"

mm

6.0 (+1)

6.0 (+1)

Rear door to top of side section

Dimension "D"

mm

6.0 (+1)

-

Rear door to side section, bottom

Dimension "J"

mm

5.0 (0.5)

5.0 (0.5)

Fender to A-pillar

Dimension "Q"

mm

-

-

Front door to rear fender

Dimension "P"

mm

-

-

See picture

AR60.00-P-0700-01E

AR60.00-P-0700-01EA

Number

Designation

Model 202

BA72.12-P-1001-01A

Bolts at door hinge

Nm

37

BA72.12-P-1003-01A

Bolts to lock eye

Nm

28