Removing and installing door liner on front door

AR72.10-P-1000F

Removing and installing door liner on front door

16.3.10

29.7.98

Cover and screw added on vehicles with SRS (side airbag)

Work step 3

AR72.10-P-1000F

Sequence of operations revised

 

Removing, installing

1

Press off handle recess (3) using assembly wedge.



*110589035900

2

Unscrew screw (4) in the area of the interior door control

3

Unclip cover (11) and unscrew screw (12)

On vehicles with front side airbag (with code 292)

4

Unscrew screw (1) on lock escutcheon (2) and remove lock escutcheon downwards

5

Press off cover (5) under armrest on door pocket and unscrew screw (6)

6

Unclip entrance lamp and disconnect electrical connection

7

Press door lining (8) off inner door panel at bottom, front and rear using assembly wedge



 Guide each assembly wedge straight to the clips

*110589035900

8

Lift door lining (8) upwards off retaining clips at the top of the sealing rail using assembly wedge and at the same time pull away from the inner door panel



*110589035900

9

Unhook control cable on interior door control

10

Pull electrical connections off door lining (8).

11

Put down door lining (8)

12

Check films and clips on inner door panel and replace if necessary.

 Stick door film to inner door panel

*BR00.45-Z-1004-02A

13

Check clips (9) on door lining (1) and replace if necessary

14

Install in reverse order

Number

Designation

Order number

BR00.45-Z-1004-02A

Adhesive PVC 914

A 001 989 30 71