Remove/install front door window · ar7210d1910b · Mercedes-Benz WIS

Designation

Model
906.1/6/7

Model
906.2

BA72.15-N-1016-01C

Screw, speaker to inner door panel

AR72.10-D-1910B

Remove/install front door window

27.9.11

MODEL 900, 906

D72.10-1109-06

1 Window(s)

2 Sealing foil

6 Connector plug (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

9 Power window

A2/103 Driver door Keyless Entry antenna (model 906 with code (FY9) Keyless entry+slide)

A2/104 Passenger door Keyless Entry antenna (model 906 with code (FY9) Keyless entry+slide)

H4/25 Bass midrange speaker (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

H4/26 Bass midrange speaker (with code (EL8) Two-way speaker, front or code (EL9) Two-way speaker, front and rear)

N69/1 Driver door control unit

 	Remove/install
 Danger!	Risk of injury caused by scraping or cutting body parts on sharp vehicle parts	Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels.	AS00.00-Z-0017-01A
1	Move window (1) to assembly position	 Assembly position is approx. 10 cm in front of limit stop.
2	Remove door trim on hinged door		AR72.15-D-2150E
3	Remove Keyless Entry driver door antenna (A2/103) or Keyless Entry front passenger door antenna (A2/104)	Model 906 with code (FY9) Keyless entry+slide	AR80.61-D-2800A
4	Remove driver door control unit (N69/1)		AR72.29-D-1000A
5	Remove connector plug (6) and remove bass midrange speaker (H4/25) or (H4/26)	With code (EL8) Front two-way speaker or code (EL9) Front and rear two-way speaker
			*BA72.15-N-1016-01C
6	Carefully remove sealing foil (2) from door	 Installation: Replace damaged sealing foil (2).
7	Remove power window (9)		AR72.15-D-5701A
8	Guide window (1) downward and remove.
9	Install in the reverse order

 Hinged doors