Remove/install hinged door power window motor

AR72.15-D-5701A

Remove/install hinged door power window motor

3.2.12

3.2.12

Value modified: Nut, power window to door

*BA72.15-N-1004-01C

Value modified: Bolt, power window to door

*BA72.15-N-1005-01C

Value modified: Bolt, power window mount with glass pane

*BA72.15-N-1006-01C

 

Remove/install

 Danger!

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.

Deburr repair panels.

AS00.00-Z-0017-01A

1

Move window (12) to assembly position

 Assembly position is approx. 10 cm in front of limit stop.

2

Remove door trim

AR72.15-D-2150E

3

Remove Keyless Entry driver door antenna (A2/103) or Keyless Entry front passenger door antenna (A2/104)

Model 906 with code (FY9) Keyless entry+slide

AR80.61-D-2800A

4

Remove driver door control unit (N69/1)

AR72.29-D-1000A

5

Remove connector plug (4) and remove bass midrange speaker (
H4/25) or (H4/26)

With code (EL8) Front two-way speaker or code (EL9) Front and rear two-way speaker



*BA72.15-N-1016-01C

6

Carefully remove sealing foil (14) from door

 Installation: Replace damaged sealing foil (14).

7

Unscrew window bracket (10) and push up window (12)

 Installation: Align window (12) in center and check power window (9) for proper function. For this purpose connect driver door control unit (N69/1) and driver door control panel or passenger power window switch before installing hinged door paneling. Close window (12) , align window (12) in center and tighten window mount (10). Check window lifter (9) and window (12) for ease of movement, repeat adjustment if necessary.



*BA72.15-N-1006-01C

8

Secure window (12) against falling down with long wedge

 Long wedge

*115589035900

9

Unscrew bolts (6) and nuts (13) on power window (9)



*BA72.15-N-1005-01C



*BA72.15-N-1004-01C

10

Remove connector plug (7) from driver door power window motor (M10/1) or passenger door power window motor (M10/2)

11

Remove power window (9)

 Installation: Grease guide rail with multipurpose paste.

Multi-purpose paste

*BR00.45-Z-1009-06A

12

Loosen bolt (8), unscrew bolts (11) and remove driver door power window motor (M10/1) or passenger door power window motor (M10/2) from window lifter (9)

13

Install in the reverse order

Number

Designation

Model
900

Model
906.1/6/7

Model
906.2

BA72.15-N-1004-01C

Nut, power window to door

M6

Nm

9

9

9

BA72.15-N-1005-01C

Bolt, power window to door

M6

Nm

9

9

9

BA72.15-N-1006-01C

Bolt, power window mount with glass pane

Nm

6

6

6

BA72.15-N-1016-01C

Screw, speaker to inner door panel

Nm

2

2

2

Number

Designation

Order number

BR00.45-Z-1009-06A

Multi-purpose paste

A 000 989 80 51 10