P68.30-0305-06
1 Spare wheel cover
2 Side paneling
3 Load anchor
4 Cover
X58/4 Cargo area connector box
| Removal, installation | ||
1 | Fold up spare wheel cover (1) and remove | ||
2 | Remove cover (4) above bolts for load anchor | ||
3 | Unscrew bolt for load anchors (3) | ||
4 | Fold rear seat backrest forward | ||
5 | Remove panel on C-Pillar | ||
6 | Disconnect plug from cargo area connector box (X58/4) | The cargo area connector box (X58/4) is located only in the left side | |
7 | Unscrew both screws (arrows) for side paneling (2) | ||
8 | Unclip side paneling (2) on door frame and remove toward front | Note: Pull off rubber door grommet to unclip side paneling (2) | |
9 | Reinstall in opposite order |