ar6830p4780b

Removing and installing side paneling in rear

Type ar · topic 68.30 · version 0100 · 1997-04-24

Applies to: MODEL 210.2

Where it sits

Function group 3 Body › 68 Interior equipment › 68.30 Coverings, trim — Series 210 (models 2**)

EinPAS 37 Interior equipment › 37.45 Trim › 37.45.30 Vehicle interior/passenger compartment trim — Series 210 (models 2**)

AR68.30-P-4780B

Removing and installing side paneling in rear

28.11.95

MODEL 210.2

Removing and installing side paneling in rear

P68.30-0305-06

1 Spare wheel cover

2 Side paneling

3 Load anchor

4 Cover

X58/4 Cargo area connector box

Removal, installation

1

Fold up spare wheel cover (1) and remove

2

Remove cover (4) above bolts for load anchor

3

Unscrew bolt for load anchors (3)

4

Fold rear seat backrest forward

5

Remove panel on C-Pillar

AR68.30-P-4490FA

6

Disconnect plug from cargo area connector box (X58/4)

The cargo area connector box (X58/4) is located only in the left side
panel (2)

7

Unscrew both screws (arrows) for side paneling (2)

8

Unclip side paneling (2) on door frame and remove toward front

Note: Pull off rubber door grommet to unclip side paneling (2)

9

Reinstall in opposite order

Referenced documents