Test and adjustment values for rear window
Number | Designation | Model 140 | ||
BE67.20-P-1001-01B | Distance between top of window and rear edge of roof | Dimension "A" | mm | 16 |
See figure | ||||
P67.20-0282-01
1 Before applying glue align rear window in body opening (observe dimension "A", measured between top of window and rear edge of roof).
Ensure that distance from edge of window to clip is sufficient to allow installation of molding without damaging window.
a Window
b Glue bead
c Body
P67.20-0283-01
2 Apply strips of tape (arrows), cut through at top of window and remove window.
3 Remove protective foil from retaining strips.