P63.50-2909-09
Shown on left side of vehicle on
model 199.3
1 Position cutting template (2) on rear fender (1), fit and fix in place.
Ensure that cutting templates (2) is correctly positioned.
P63.50-2912-09
Shown on left side of vehicle on
model 199.3
2 Scribe separation lines on rear fender (1) using cutting template (2) (areas B, C and D).
3.1 Scribe separation line on rear fender (1) using cutting template (2) (area A1).
On model 199.3 scribe separation line on rear fender (1) in area (A1).
3.2 Scribe separation line on rear fender (1) using cutting template (2) (area A2).
On model 199.4 scribe separation line on rear fender (1) in area (A2).
4 Remove cutting template (2).
P63.50-2916-09
Shown on left side of vehicle on
model 199.3
5.1 Cut rear fender (1) at separation point using body saw or multicutter (area A1).
Do not damage fiber composite in areas adjacent or below, otherwise strength of components can be impaired.
On model 199.3 cut rear fender (1) in area (A1).
5.2 Cut rear fender (1) at separation point using body saw or multicutter (area A2).
Do not damage fiber composite in areas adjacent or below, otherwise strength of components can be impaired.
On model 199.4 cut rear fender (1) in area A2.
6 Cut rear fender (1) at separation point using body saw or multicutter (areas B, C and D).
7 Remove damaged section from rear fender (1).
P63.50-2919-09
Shown on left side of vehicle on
model 199.3
8 Separate remaining piece of rear fender (1.1) from vehicle using multicutter.
Do not damage mating surfaces on vehicle.
Use spacer wedge to loosen.
9 Remove adhesive residues on vehicle.
10 Remove sanding residues and drilling chips with wet/dry vacuum cleaner.