ar6140d1005te

Remove/install guard plate on high-voltage battery carrier

유형 ar · 주제 61.40 · 버전 0102 · 2019-12-09

적용 대상: Model 910 with engine 780.703

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 3 구조 › 61 언더바디 › 61.40 언더바디　보호 — 시리즈 910

EinPAS 16 연료/에너지 공급, 엔진 › 16.20 고전압 시스템 › 16.20.20 고전압 배터리 모듈 — 시리즈 910

엔진/변속기에도 적용: 780 703

AR61.40-D-1005TE

Remove/install guard plate on high-voltage battery carrier

03.12.2019

Model

910 with engine 780.703

Remove/install guard plate on high-voltage battery carrier

1

Protective plate

2

Screw

3

Bolts

D61.40-A000-76

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Topical note

General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system

AH00.00-Z-0300-01A

Remove/install

1

Remove underbody paneling.

AR61.30-D-1001TS

2

Remove screw/bolts (2) .

Screw, protective plate to high-voltage battery carrier

*BA61.40-N-1001-01TS

3

Remove protective plate (1).

To do this, remove screws/bolts (3).
Helper required.

Screw, protective plate to high-voltage battery carrier

*BA61.40-N-1001-01TS

4

Install in the reverse order.

Underbody protection

Number

Designation

Model 910 with engine 780.703

BA61.40-N-1001-01TS

Screw, protective plate to high-voltage battery carrier

Nm

50

참조 문서