ar5425d2800h

Remove/install combination switch

유형 ar · 주제 54.25 · 버전 0102 · 2011-06-30

적용 대상: MODEL 900, 906

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 54 전기 장치, 장비 및 계기 › 54.25 스위치 — 시리즈 900 · 시리즈 906

EinPAS 25 온보드 전기 시스템/네트워크/다기능 › 25.15 네트워크/다기능 › 25.15.18 스위치/스위치 그룹/컨트롤 패널 — 시리즈 900 · 시리즈 906

AR54.25-D-2800H

Remove/install combination switch

28.6.11

MODEL 900, 906

Remove/install combination switch

D46.10-1124-11

1 Screw

S144 Combination switch

Remove/install

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Remove clock spring contact with steering angle sensor

AR46.10-D-0200H

2

Remove pushbutton switch with variable speed limiter cruise control (TPM)

For code (MS1) Cruise control

AR54.25-D-2803H

3

Remove bolt (1)

Bolt (1) is accessible from below through the lower steering column trim.

4

Detach combination switch (S144)

The electrical connectors are automatically disconnected when detached.

Installation: Pay attention to correct installed position.

5

Install in the reverse order

6

Carry out function check

참조 문서