ar5425d2803h

Remove/install cruise control switch

유형 ar · 주제 54.25 · 버전 0102 · 2011-06-30

적용 대상: MODEL 900, 906 with CODE (MS1) Cruise control

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 54 전기 장치, 장비 및 계기 › 54.25 스위치 — 시리즈 900 · 시리즈 906

EinPAS 28 컴포트/운전자 지원 시스템 › 28.25 속도 컨트롤 › 28.25.12 센서/스위치/배선 — 시리즈 900 · 시리즈 906

AR54.25-D-2803H

Remove/install cruise control switch

28.6.11

MODEL 900, 906 with CODE (MS1) Cruise control

Remove/install cruise control switch

D46.10-1123-11

1 Clock spring contact

N80s2 Cruise control switch

Remove/install

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Danger!

Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units.

Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply.

AS91.00-Z-0001-01A

Legal requirements on handling and storing airbags and emergency tensioning retractor units

AH91.00-P-0004-01A

1

Remove clock spring contact (1) with steering angle sensor

AR46.10-D-0200H

2

Detach cruise control switch (N80s2)

The electrical connector is automatically disconnected during removal.

Installation: Pay attention to correct installation position.

3

Install in the reverse order

Check

4

Perform function test on cruise control

Conduct a road test.

참조 문서