20 | Electrical connection |
21 | Screw/bolt |
22 | Vent pipe |
23 | Suction pipe |
24 | Air intake hose |
25 | Vehicle wiring harness |
26 | Bracket |
W09.10-1054-06
W49.10-1149-08
1 | Exhaust pipe | 3 | Heat shield | |
2 | Exhaust flex pipe | 4 | Clamp |
Danger ! | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger ! | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
| Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Open engine hood and raise to vertical position | ||
Installation: Close the engine hood only after carrying out a leak check. | |||
2 | Remove air filter housing | ||
3 | Disconnect electrical connection (20) | ||
4 | Detach suction line 23) | ||
5 | Detach ventilation pipe (22) | ||
6 | Remove screw/bolt (21) | ||
7 | Detach air intake hose (24) from ATL and remove | ||
8 | Unfasten exhaust pipe (1) and put aside to the rear from working area | ||
9 | Remove heat shield (3) | Screw/bolt, heat shield to exhaust gas turbocharger and engine brake valve fitting | |
10 | Remove clamp (4) | Installation: Replace hose clamp (4). | |
Screw/bolt, V-band-type clamp of exhaust pipe to flanged manifold | |||
11 | Remove exhaust-gas flexible tube (2) to the rear | ||
12 | Install in the reverse order | ||
| Check | ||
13 | Start engine and check the exhaust system for leaktightness | Visual inspection. |
참조 문서
- ah0000n000101a 자가 잠금식 볼트와 너트 관련 지침
- ar0910w1150s
- ar4910w1001s
- ar8840w1000r
- as0000z000201a 뜨겁거나 달아오른 물체를 취급할 때 피부와 눈에 입을 수 있는 상해 위험
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험