W49.10-1148-09
1 | Shield | 3 | Clamps | 5 | Screw/bolts | ||
2 | Nuts | 4 | Exhaust pipe | 6 | Clamp |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Remove shield (1) on right cab | Only for vehicles fitted with structure 949.899. | |
Installation: Only install shield (1) after the leak check. | |||
2 | Unscrew nuts (2) and unfasten clamps (3) | Bolt, clamp to bracket | |
Bolt, clamp to premuffler, exhaust pipe, rear muffler and flexible exhaust pipe | |||
3 | Open screw/bolt (5) and clamp (6) | Bolt, exhaust pipe flat band clip to inlet pipe exhaust gas trap | |
4 | Lead out exhaust pipe (4) to the rear and remove | ||
5 | Install in the reverse order | ||
| Check | ||
6 | Start engine and check the exhaust system for leaktightness | Visual inspection. | |
7 | Turn off engine |
참조 문서
- ah0000n000101a 자가 잠금식 볼트와 너트 관련 지침
- ar6080w0003s
- as0000z000201a 뜨겁거나 달아오른 물체를 취급할 때 피부와 눈에 입을 수 있는 상해 위험
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험