ar4305d1320sd

Remove/install vacuum pump

유형 ar · 주제 43.05 · 버전 0102 · 2010-06-18

적용 대상: MODEL 906 with ENGINE 646.984 /985 /986 /989 /990

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 43 브레이크-공압장치 및 보조브레이크 › 43.05 진공펌프 — 시리즈 646 (모델 984, 985, 986, 989, 990) · 시리즈 906

EinPAS 21 브레이크/진공압 시스템/압축 공기 시스템 › 21.15 주 브레이크/진공압 시스템 › 21.15.50 진공압 펌프/압축공기 탱크 — 시리즈 646 (모델 984, 985, 986, 989, 990) · 시리즈 906

AR43.05-D-1320SD

Remove/install vacuum pump

16.6.10

MODEL 906 with ENGINE 646.984 /985 /986 /989 /990

Remove/install vacuum pump

D43.05-1102-08

Shown on engine 646.984

1 Vacuum pump

3 Screw

4 Bracket

2 Brake booster vacuum line

Remove/install

1

Unscrew bolt (3)

Only with engines 646.984/985/986

2

Detach vacuum line of brake booster (2) at the vacuum pump (1)

Squeeze catches (arrows) together and detach brake booster vacuum line (2).

3

Remove bolts of vacuum pump (1) and remove with bracket (4)

The bracket (4) is only removed on engines 646.984/985/986.

The vacuum pump (1) is fastened with two bolts.

*BA43.05-N-1005-01B

4

Remove vacuum pump (1).

Installation: Replace sealing rings of vacuum pump (1) and align drive plate.

5

Install in the reverse order

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out engine test run and check engine in the area of the vacuum pump (1) for leaks

Vacuum pump

Number

Designation

Model
906 with engine 646

BA43.05-N-1005-01B

Bolt, vacuum pump to cylinder head

Nm

14

참조 문서