ar4230p0712rt

Remove/install left or right front axle rpm sensor

유형 ar · 주제 42.30 · 버전 0100 · 2006-07-26

적용 대상: MODELS 251

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 42 브레이크-유압장치 및 기계장치 › 42.30 안티록 브레이크 시스템 (ABS) — 시리즈 251

EinPAS 26 능동형 안전 시스템 › 26.20 브레이크/트랙션 컨트롤 › 26.20.12 센서/스위치/배선 — 시리즈 251

AR42.30-P-0712RT

Remove/install left or right front axle rpm sensor

31.3.05

MODELS 251

Remove/install left or right front axle rpm sensor

P42.30-2116-09

Illustrated on right side of vehicle

1 Bolt

2 Line for rpm sensor

3 Electrical connectors

L6/1 Left front rpm sensor

L6/2 Right front rpm sensor

Remove/Install

Information on preventing damage to electronic components due to electrostatic discharge

All models

AH54.00-P-0001-01A

1

Turn steering to side on which repair work is to be performed

2

Switch off ignition and remove the transmitter key from the EIS [EZS] control unit

On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m).

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

3

Raise vehicle with lifting platform

AR00.60-P-1000RT

4

Remove the front section of the fender liner in the left or right front fender

AR88.10-P-1310RT

5

Remove bolt (1) and pull left front rpm sensor (L6/1) or right front rpm sensor (L6/2) out of steering knuckle

Installation: Fit new bolt (1).

Notes on self-locking nuts and bolts

All models

AH00.00-N-0001-01A

*BA42.30-P-1001-01I

6

Disconnect electrical connectors (3) from body socket

7

Disconnect electrical connectors (3) from each other (arrows B)

Carefully disconnect electrical connectors (3).

8

Remove line for rpm sensor (2) on left or right side of vehicle from brackets (arrows A)

Installation: Pay attention to correct routing of the line for the rpm sensor (2). Route the line of the rpm sensor (2) so that there is no crossover.

9

Install in the reverse order

10

Read out fault memory and erase

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A

Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Front axle rpm sensor

Number

Designation

Type 251

BA42.30-P-1001-01I

Self-locking bolt, front axle rpm sensor to steering knuckle

Nm

8

Commercially available tools

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00

참조 문서