Remove, install diaphragm cylinder · ar4210w0800e · Mercedes-Benz WIS

AR42.10-W-0800E

Remove, install diaphragm cylinder

5.12.06

MODEL 958.0, 970, 972, 976
with drum brake (S cam version)

W42.10-1032-12

Shown on front axle 731.720

1 Brake line

2 Split pin

3 Washer

4 Pin

5 Nut

6 Single-circuit diaphragm brake cylinder

Modification notes

9.11.06	Special tools added.	Step 4	*000589260100
			*001589442100

 	Remove/install
1	Discharge compressed-air system
2	Remove brake line (1) on single-circuit diaphragm brake cylinder (6)	With "VOSS 230" compressed air connector.	AR42.10-W-0900A
		With compressed air connector "VOSS 232" (NG 8, NG 12) or "SCHÄFER SDF" (NG 6).	AR42.10-W-0900C
	Notes on compressed air connection systems		AH00.18-N-0001-01A
3	Remove pin (4)	 Installation: Use new cotter pin (2).
4	Remove single-circuit diaphragm brake cylinder (6)	 Installation: Use new self-locking nuts (5).
			*000589260100
			*001589442100
			*BA42.10-N-1004-08A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
5	Install in the reverse order

 Brake cylinder

Number	Designation			Models 375.1, 970, 972, 974, 975, 976 with drum brake	Model 958.0/2/4 with drum brake


BA42.10-N-1004-08A	Self-locking nut, diaphragm cylinder to bearing bracket	M161.5	Nm	180	180

001 589 44 21 00

Torque wrench handle

Open end wrench

000 589 26 01 00