Remove/install switch for brake pedal rear end position

AR42.10-S-0046P

Remove/install switch for brake pedal rear end position

06.06.2017

Model

470, 471

Shown on model 470

1

Stop lamp switch

6

Electrical connector

4

Switch for brake pedal rear end position

Y

Dimension

5

Bracket

 Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S



Remove

1

Remove driver kneebag

AR91.60-S-0200P

2

Remove the brake light switch (1) with attached electric line and set aside

AR42.10-S-0045P

3

Turn switch for brake pedal rear end position (4) 45° in counterclockwise direction and remove from holder (5)

4

Release electrical connector (6), disconnect it and remove switch for brake pedal rear end position (4)



Install

5

Plug electrical connector (6) onto switch for brake pedal rear end position (4), until it is locked into place

6

Insert switch for brake pedal rear end position (4) into holder (5), adjust dimension (Y) and turn switch for brake pedal rear end position (4) 45° in clockwise direction

 The brake pedal must be in the rear end position.

Distance from housing of switch for brake pedal rear end position to contact surface on brake pedal

*BE42.10-N-1001-10P

7

Install switch for brake light (1)

AR42.10-S-0045P

8

Install driver kneebag

AR91.60-S-0200P

Service brake

Number

Designation

Model 470, 471

BE42.10-N-1001-10P

Distance from housing of switch for brake pedal rear end position to contact surface on brake pedal

Dimension "Y"

mm

0,74...1,96

For picture, see

AR42.10-S-0046P