Remove/install compressed-air line connector · ar4210d0900ad · Mercedes-Benz WIS

AR42.10-D-0900AD

Remove/install compressed-air line connector

15.8.07

MODEL 668, 670 with ENGINE 900.9 with CODE (B16) Hydraulic 2-circuit / compressed air 2-circuit brakes
with compressed air connector VOSS 232 (NG 8, NG 12)

Remove/install compressed-air line connector

W42.10-1141-12

1 Retaining screw

2 Connector

3 O-ring

 	Remove/install
	Notes on compressed air connection systems		AH00.18-N-0001-01A
1	Release reservoir air from compressed air system
2	Unscrew retaining screw (1) and disconnect connector (2) with compressed air line	 Disassemble defective compressed air connector. See 
		Disassemble/assemble compressed air connector	AR42.10-W-0950-01A
		 Installation: Install new O-ring (3).
			*BA43.00-N-1002-01C
			*BA43.00-N-1003-01C
			*000589270100
			*000589280100
			*001589752100
3	Install in the reverse order
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
4	Allow engine to run, fill compressed air system completely, switch off engine and check compressed air connector for leaks

 Compressed-air line connectors

Number	Designation			Model 668, 670


BA43.00-N-1002-01C	Retaining screw, compressed air line to compressed air reservoir	M221.5	Nm	12
BA43.00-N-1003-01C	Retaining screw, compressed air line to compressed air distributor	M161.5	Nm	12

000 589 28 01 00

Torque wrench

Open end wrench

000 589 27 01 00

001 589 75 21 00

참조 문서

ah0018n000101a 압축공기 커넥션 시스템 관련 지침
ar4210w095001a 압축 공기 플러그 커넥터 분해, 조립
as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험