ar4030p0400rt

Checking accident vehicles and vehicles possibly damaged in an accident

유형 ar · 주제 40.30 · 버전 0101 · 2007-11-07

적용 대상: MODEL 251

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 40 휠, 섀시 측정 › 40.30 사고측정 — 시리즈 251

EinPAS 20 섀시 › 20.10 섀시 얼라인먼트 › 20.10.20 진단/점검/측정/조정 — 시리즈 251

AR40.30-P-0400RT

Checking accident vehicles and vehicles possibly damaged in an accident

31.10.07

MODEL 251

Checking

1

Drive the vehicle onto the measuring station and secure using the parking brake

The measuring system must be approved by Mercedes-Benz.

2

Perform preparations for distance and comparative measurements

AR40.30-P-0401GZ

3

Carry out distance and comparison measurements on front and rear axles

These measurements determine whether it is necessary to replace chassis components or repair the body on the straightening bench. Use either the reference value (difference between left and right) or the distance for assessment.

AR40.30-P-0402GZ

In the event of visible damage (e.g. crack formation, deformation) on front axle or rear axle carrier the damaged parts should be replaced.

4

Repair vehicle

Where damage has been detected.

5

Perform a wheel alignment check

When the vehicle has been repaired.

AR40.20-P-0200RT

참조 문서