Removing and installing crown wheel and pinion

AR35.30-T-0432B

2.3.12

REAR AXLE 745.990 /996 /997 in MODEL 613

T35.30-0015-01

1 Crown wheel and pinion

2 Axle housing

 	Removing, installing
1	Remove both rear axle shafts		AR35.30-T-0620B
2	Detach propeller shaft from rear axle		AR41.10-T-0050B
3	Detach crown wheel and pinion (1) from axle housing (2)	Installing: - Clean sealing surfaces on axle housing (2) and crown wheel and pinion (1) and coat with sealing compound. - Replace bolts. - Observe tightening sequence: First tighten two opposite bolts and then tighten remaining bolts in clockwise or counterclockwise direction starting at one of two bolts tightened first.
			*BR00.45-Z-1092-02A
			*BA35.30-N-1008-03H
4	Install in reverse order

Crown wheel and pinion with differential gear

Number	Designation			Rear axle 745.990 with crown wheel  368	Rear axle 745.996 with crown wheel  485


BA35.30-N-1008-03H	Serrated bolt of center drive to axle beam	M16x1.5	Nm	230	230

Crown wheel and pinion with differential gear

Number	Designation			Rear axle 745.997 with crown wheel  410


BA35.30-N-1008-03H	Serrated bolt of center drive to axle beam	M16x1.5	Nm	230

Repair materials

Number	Designation	Order number
BR00.45-Z-1092-02A	Adhesive kit, body, 2-component adhesive	A 009 989 36 71