Pressing front axle shaft out of front axle shaft flange

유형 ar · 주제 33.30 · 버전 0106 · 2019-12-04

적용 대상: Model 447 with engine 622 Model 447 with engine 651 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 780.701/702 Model 639 with code ZG2 (Permanent all-wheel drive)

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 33 앞차축 › 33.30 구동장치, 차동기어, 구동축 — 시리즈 447 · 시리즈 622 · 시리즈 639 · 시리즈 651 · 시리즈 654

EinPAS 17 드라이브 트레인/액슬 › 17.50 앞차축 › 17.50.51 액슬 샤프트/드라이브 샤프트 — 시리즈 447 · 시리즈 622 · 시리즈 639 · 시리즈 651 · 시리즈 654

엔진/변속기에도 적용: 780 701, 780 702

AR33.30-S-0620-04S

Pressing front axle shaft out of front axle shaft flange

Model	447 with engine 622
Model	447 with engine 651
	with code ZG2 (Permanent all-wheel drive)
Model	447 with engine 654
	with code ZG2 (Permanent all-wheel drive)
Model	447 with engine 780.701/702
Model	639
	with code ZG2 (Permanent all-wheel drive)

210 589 03 43 00

Extraction and insertion tool

 The collar nut of the front axle shaft must be removed and the transverse control arm released.

1	 Secure extraction and insertion tool with wheel bolts.

2	Press firmly seated front axle shaft out of wheel hub.

3	 Remove extraction and insertion tool.

S33.30-4501-11