Pressing front axle shaft out of front axle shaft flange

Type ar · topic 33.30 · version 0106 · 2019-12-04

Applies to: Model 447 with engine 622 Model 447 with engine 651 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 654 with code ZG2 (Permanent all-wheel drive) Model 447 with engine 780.701/702 Model 639 with code ZG2 (Permanent all-wheel drive)

Where it sits

Function group 2 Chassis › 33 Front axle › 33.30 Final drive, differential, drive shaft — Series 447 · Series 622 · Series 639 · Series 651 · Series 654

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.51 Axle shaft/drive shaft — Series 447 · Series 622 · Series 639 · Series 651 · Series 654

Also applies to engines/gearboxes: 780 701, 780 702

AR33.30-S-0620-04S

Pressing front axle shaft out of front axle shaft flange

Model	447 with engine 622
Model	447 with engine 651
	with code ZG2 (Permanent all-wheel drive)
Model	447 with engine 654
	with code ZG2 (Permanent all-wheel drive)
Model	447 with engine 780.701/702
Model	639
	with code ZG2 (Permanent all-wheel drive)

210 589 03 43 00

Extraction and insertion tool

 The collar nut of the front axle shaft must be removed and the transverse control arm released.

1	 Secure extraction and insertion tool with wheel bolts.

2	Press firmly seated front axle shaft out of wheel hub.

3	 Remove extraction and insertion tool.

S33.30-4501-11