AR33.20-P-0425D | Checking supporting joint and follower joint of steering knuckle mount (removed) | 2.9.96 |
MODEL 210.08 /28
P33.20-0349-01
P33.20-0350-01
| Removal | ||
1 | Remove supporting joint (7) | ||
2 | Remove upper wishbone (6) | ||
| Checking | ||
3 | Move ball pin in all directions with an approx. 150 mm tube to check ball pin of supporting joint (7) and follower joint (8). | It must be possible to move the ball pin without any play, without jamming and creaking noises, replace supporting joint or upper wishbone if necessary after checking. | |
4 | Check rubber boot (7f, 8f) for cracks and damage | Replace supporting joint or upper wishbone if necessary after checking. | |
| Installation | ||
5 | Install supporting joint (7) | ||
6 | Install upper wishbone (6) |