AR26.40-D-2471A | Disassemble/assemble front part of transmission housing | 3.5.99 |
TRANSMISSION 711.605
TRANSMISSION 711.620 /621
TRANSMISSION 711.620 /621
with CODE (N05) Countershaft PTO (2c) without flange
with CODE (N07) PTO countershaft (2b) with flange
TRANSMISSION 711.620 in MODEL 690.6
D26.40-0014-12
Transmission 711.605
1 Front section of transmission housing
2 Catch spring
3 Shift rail guide plate
4 Bolt
5 Bearing outer race
6 Plug
7 Shift cable bracket
12 Bolt
D26.40-0015-06
Transmission 711.620/621
1 Front section of transmission housing
2 Catch spring
3 Shift rail guide plate
4 Bolt
6 Plug
7 Shift cable bracket
8 Shim
9 Bearing cover
10 Bolts
11 Bearing outer race
12 Bolt
| Disassemble/assemble | ||
1 | Disassemble transmission housing | ||
2 | Remove drive shaft. | Installation: If front section of transmission housing has been replaced, drive shaft bearing play must be adjusted: | |
Adjust drive shaft bearing play | |||
3 | Remove shift rail guide plate (3) together with detent spring (2) | Installation: Recut the tapped holes of the micro-encapsulated bolts. Use new micro-encapsulated bolts. | |
| |||
4 | Remove plugs (6) of central clutch operator vent. | ||
5.1 | Remove outer race (5) of countershaft bearing. | Only with transmission 711.605 | |
Internal extractor | |||
Countersupport | |||
5.2 | Remove bearing cap (9), take out graduated disk (8). | Only with transmission 711.620/621 | |
| |||
6 | Drive countershaft bearing outer race (11) through to transmission interior using drift | Only with transmission 711.620/621 Installation: first install bearing cap (9) and then insert graduated disk (8). Then drive in outer face from inside of transmission. | |
Drift | |||
7 | Assemble in reverse order |
Adjustment data for ring gear and pinion
Number | Designation | Transmission 711.605 | Transmission | ||
BE26.50-N-1006-01D | Axial play between drive shaft bearing and circlip | mm | 0.02-0.08 | 0.02...0.08 | |
Transmission housing
Number | Designation | Transmission | Transmission | |
BA26.40-N-1006-01A | Countershaft bearing cover to transmission housing | NM | - | 21 |
BA26.40-N-1010-01A | Bolt, shift rail guide to transmission housing | NM | 23 | 23 |
000 589 33 33 00
Drift
Countersupport
Internal extractor
000 589 27 33 00
711 589 09 15 00