Detach, attach transmission bearing bracket at transmission

유형 ar · 주제 26.10 · 버전 0107 · 2001-01-17

적용 대상: TRANSMISSION 710.64 in MODEL 668, 670 with ENGINE 904.908 TRANSMISSION 710.66 in MODEL 668, 670 with ENGINE 904.914 /923 /936 TRANSMISSION 710.64 in MODEL 670 with ENGINE 904.904

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 2 섀시 › 26 수동변속기 › 26.10 변속기 전체 — 시리즈 668 · 시리즈 670 · 시리즈 904 (모델 904, 908, 914, 923, 936)

EinPAS 17 드라이브 트레인/액슬 › 17.20 변속기 › 17.20.30 하우징/커버/오일 팬/마운트 — 시리즈 668 · 시리즈 670 · 시리즈 904 (모델 904, 908, 914, 923, 936)

엔진/변속기에도 적용: 710 64*, 710 66*

AR26.10-D-0020-01D

Detach, attach transmission bearing bracket at transmission

 Manual transmission complete

Number	Designation		Trans-mission 710.640


BA26.10-N-1004-01B	Bolt, console to transmission bearing bracket	Nm	50

Detach, attach transmission bearing bracket at transmission

D26.10-0051-01

1 Unscrew fixing bolt of transmission bearing bracket.

 Installation: Place engine with transmission slightly raised onto transmission bearing bracket, screw in fixing bolts and tighten by hand until they make contact. Then, lower the engine and transmission fully and tighten securing bolts.

 Installation: Pay attention to tightening torque.