Detach, attach transmission bearing bracket at transmission

Type ar · topic 26.10 · version 0107 · 2001-01-17

Applies to: TRANSMISSION 710.64 in MODEL 668, 670 with ENGINE 904.908 TRANSMISSION 710.66 in MODEL 668, 670 with ENGINE 904.914 /923 /936 TRANSMISSION 710.64 in MODEL 670 with ENGINE 904.904

Where it sits

Function group 2 Chassis › 26 Manual transmission › 26.10 Complete transmission — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.30 Housing/cap/oil pan/mounting — Series 668 · Series 670 · Series 904 (models 904, 908, 914, 923, 936)

Also applies to engines/gearboxes: 710 64*, 710 66*

AR26.10-D-0020-01D

Detach, attach transmission bearing bracket at transmission

 Manual transmission complete

Number	Designation		Trans-mission 710.640


BA26.10-N-1004-01B	Bolt, console to transmission bearing bracket	Nm	50

Detach, attach transmission bearing bracket at transmission

D26.10-0051-01

1 Unscrew fixing bolt of transmission bearing bracket.

 Installation: Place engine with transmission slightly raised onto transmission bearing bracket, screw in fixing bolts and tighten by hand until they make contact. Then, lower the engine and transmission fully and tighten securing bolts.

 Installation: Pay attention to tightening torque.