S26.00-A002-79
1 | Axle drive module | 3 | O-ring | |
2 | Oil filler plug |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Caution | Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | ||
Check/correct | |||
1.1 | Raise vehicle. | Model 447 with engine 780.701 | |
1.2 | Remove engine compartment lining. | Model 447 with engine 780.702 | |
2 | Clean axle drive module (1) in area of oil filler screw (2). | Assembly cleaner | |
3 | Remove oil filler screw (2). | ||
4 | Check transmission oil level. | The transmission oil must be at the bottom edge of the filler opening (arrow A). | |
5 | Pour in transmission oil up to lower edge of filler opening (arrow A). | If transmission oil level is too low. | |
Gear oil | |||
6 | Replace oil filler screw (2) and O-ring (3). | Assembly tool | |
7 | Screw in oil filler screw (2). | Filling screw to transmission housing | |
8.1 | Lower vehicle. | Model 447 with engine 780.701 | |
8.2 | Install engine compartment lining. | Model 447 with engine 780.702 | |
000 589 93 63 00
Assembly tool
참조 문서
- ah0000z030001a 고전압 차량 전원 시스템 및/또는 리튬 이온 배터리 및/또는 가스 구동 시스템 장착 차량과 개인 보호 장비에 관한 일반 지침
- ar0060s1000e
- ar6120s1105e
- ar6120s1105e
- as0000z003501a U >= 30V 교류(AC) 또는 U >= 60V 직류(DC)를 사용하는 부품 및 시스템 작업 시 생명 위험
- as0040z000101a 변속기 오일 취급 시 피부와 눈의 상해 위험 변속기 오일 흡입으로 인한 건강 위험