D22.10-A011-79
1 | Engine mount | 4 | Refrigerant lines | 6 | Screw | ||
2 | Bracket | 5 | Bracket | 7 | Bolts | ||
3 | Bolts |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Notes on self-locking nuts and bolts | ||
| Remove/install | ||
1 | Deenergize high-voltage on-board electrical system. | ||
2 | Remove ventilation box. | ||
3 | Mount engine support fixture. | ||
Commercially available devices/tools | |||
Engine lifting device | |||
Support braces | |||
4 | Remove bracket (5) of refrigerant lines (4) from bracket (2). | To do this, undo screw/bolt. | |
5 | Remove holder (2). | To do this, remove screws/bolts (3). | |
Screw/bolt, engine mount bracket to body | |||
Screw/bolt, bracket for engine mount to engine mount | |||
6 | Remove screw/bolts (6). | Screw, engine mount to body | |
7 | Remove the engine mount (1). | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
To do this, remove bolts (7). | |||
Screw, left engine carrier to mounting support | |||
| Check | ||
8 | Check engine mount (1) for wear and damage. | Depending on the findings, | |
| |||
Replace engine mount (1). | |||
9 | Install in the reverse order. |
910 589 00 63 00
Support braces
639 589 00 61 00
Engine lifting device
참조 문서
- ah0000n000101a 자가 잠금식 볼트와 너트 관련 지침
- ah0000p002001a 회전각 제어식 조임 절차에 따라 조여진 나사 체결부 관련 지침
- ah0000z030001a 고전압 차량 전원 시스템 및/또는 리튬 이온 배터리 및/또는 가스 구동 시스템 장착 차량과 개인 보호 장비에 관한 일반 지침
- ar0810d000901te
- ar4770d1000te
- ar8310d0010ts 환기 박스 탈, 장착
- as0000z003501a U >= 30V 교류(AC) 또는 U >= 60V 직류(DC)를 사용하는 부품 및 시스템 작업 시 생명 위험