P20.40-2141-09
2 Electrical connector
3 Fan shroud
5 Radiator
4 Bolts
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Turn key in ignition lock to position "0" | On vehicles with code 889, Keyless Go: Press keyless go start/stop button repeatedly until ignition is switched off. | |
2 | Unclip coolant line from expansion reservoir | Fold back coolant line. | |
| Notes on coolant | All engines | |
3 | Unplug electrical connection (2) on fan shroud (3) | ||
4 | Disconnect transmission fluid lines on cooler (5) | Seal all connections immediately using stop plugs, otherwise the automatic transmission may be damaged due to contamination. | |
| |||
5 | Unscrew bolts (4) at fan shroud (3) | ||
6 | Remove fan shroud (3) from lower mounts (5) on radiator | When removing fan shroud (3) observe that none of attached lines are damaged on radiator (5). | |
7 | Install in the reverse order | ||
| Checking | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
8 | Carry out engine test run |
Set of stop plugs
129 589 00 91 00
참조 문서
- ah2000n208001a 냉각수 지침
- ar2710p050103rt 변속기 오일 라인 분리, 연결
- as0000z000501a 엔진이 작동 중인 상태에서 급발진에 의한 사고 위험 시동 또는 구동 중인 엔진 근처에서 작업할 때 차량에 부딪히거나 열에 의한 상해 위험
- as0000z001101a 후드, 도어, 커버, 슬라이딩 루프 탈, 장착 및 설정작업 시 손가락이 끼이거나 눌려서 입을 수 있는 상해 위험