ar1830d3481us

Remove/install oil-water heat exchanger at oil filter

유형 ar · 주제 18.30 · 버전 0100 · 2007-09-13

적용 대상: ENGINE 272.979 in MODEL 906

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 18 엔진윤활, 엔진냉각 › 18.30 오일냉각기 — 시리즈 906

EinPAS 15 엔진 › 15.20 엔진 윤활 시스템 › 15.20.31 필터/냉각/서모스탯/팬/탱크 — 시리즈 906

엔진/변속기에도 적용: 272 979

AR18.30-D-3481US

Remove/install oil-water heat exchanger at oil filter

29.8.07

ENGINE 272.979 in MODEL 906

Remove/install oil-water heat exchanger at oil filter

D18.30-1107-09

1 Oil/water heat exchanger

2 Oil filter housing

Remove/install

1

Drain coolant at radiator

AR20.00-D-1140SD

2

Remove power steering expansion reservoir

AR46.25-D-1000US

3

Detach the oil-water heat exchanger (1) at the oil filter housing (2)

Catch escaping oil.

Installation: Install new gasket

*BA18.30-N-1001-01S

4

Install in the reverse order

Checking

5

Check engine oil level, correct if necessary

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out engine test run and check engine for leaks around the oil-water heat exchanger (1)

Oil cooling system

Number

Designation

Engine
272.979
in model
906

BA18.30-N-1001-01S

Bolt, oil-water heat exchanger to oil filter housing

Nm

12

참조 문서