Remove/install camshaft Hall sensor

AR15.10-P-2000RX

Remove/install camshaft Hall sensor

9.1.06

 

Remove/install

1

Remove front engine cover and left and right intake air duct

See 

Remove air filter housing.

AR09.10-P-1150RX

2

Disconnect plug from each camshaft Hall sensor.

3

Undo bolt (3) and remove each camshaft Hall sensor from front cover on cylinder head

 Installation: Replace sealing ring.



*BA15.10-P-1002-03E

4

Install in the reverse order

5

Read out fault memory

STAR DIAGNOSIS diagnosis system

*WH58.30-Z-1048-13A



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

 Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

6

Run engine and inspect for oil leaks

Number

Designation

Engine
272

Engine
273

BA15.10-P-1002-03E

Bolt connecting camshaft Hall sensor to front cover on the cylinder head

Nm

8

8

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00