Remove/install camshaft Hall sensor · ar1510p2000rx · Mercedes-Benz WIS

AR15.10-P-2000RX

Remove/install camshaft Hall sensor

9.1.06

ENGINE 272, 273 in MODEL 230

P15.10-2191-04

3 Bolt

B6/4 Left intake camshaft Hall sensor

B6/5 Right intake camshaft Hall sensor

B6/6 Left exhaust camshaft Hall sensor

B6/7 Right exhaust camshaft Hall sensor

 	Remove/install
1	Remove front engine cover and left and right intake air duct	See 
		Remove air filter housing.	AR09.10-P-1150RX
2	Disconnect plug from each camshaft Hall sensor.
3	Undo bolt (3) and remove each camshaft Hall sensor from front cover on cylinder head	 Installation: Replace sealing ring.
			*BA15.10-P-1002-03E
4	Install in the reverse order
5	Read out fault memory	STAR DIAGNOSIS diagnosis system	*WH58.30-Z-1048-13A
	Connect STAR DIAGNOSIS and read out fault memory		AD00.00-P-2000-04A
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the running engine	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not grasp hot or rotating parts.	AS00.00-Z-0005-01A
6	Run engine and inspect for oil leaks

 Position sensor

Number	Designation		Engine 272	Engine 273


BA15.10-P-1002-03E	Bolt connecting camshaft Hall sensor to front cover on the cylinder head	Nm	8	8

Commercially available tools

Number	Designation
WH58.30-Z-1048-13A	STAR DIAGNOSIS diagnosis system, Compact Passenger Car	6511 1801 00

ad0000p200004a Connect STAR DIAGNOSIS and read out fault memory
ad0000p200004a
ar0910p1150rx Remove/install air filter housing
as0000z000501a Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.