ar1322s1202ea

Remove/install poly-V belt

유형 ar · 주제 13.22 · 버전 0100 · 2019-05-15

적용 대상: Engine 654.9 in model 447

“ko”(으)로는 제공되지 않아 영어(으)로 표시합니다.

위치

기능 그룹 1 엔진 › 13 공기 압축기, 벨트 드라이브 › 13.22 싱글 벨트 드라이브 — 시리즈 447 · 시리즈 654 (모델 9**)

EinPAS 15 엔진 › 15.18 벨트 드라이브 › 15.18.30 벨트/벨트 풀리/클램핑 장치/가이드 풀리 — 시리즈 447 · 시리즈 654 (모델 9**)

AR13.22-S-1202EA

Remove/install poly-V belt

12.04.2019

Engine

654.9 in model 447

Remove/install poly-V belt

S13.22-A000-79

Shown on model 447 with code HH4 (THERMOTRONIC automatic climate control), with code HH9 (TEMPMATIC semi-automatically controlled air conditioning), with code HZ7 (TEMPMATIC semi automatically controlled air conditioning in the rear passenger compartment)

1

Poly-V-belt

2

Tensioning device

3

Drill bit

Remove/install poly-V belt

S13.22-A001-79

Shown on model 447 with code HH4 (THERMOTRONIC automatic climate control), with code HH9 (TEMPMATIC semi-automatically controlled air conditioning) or with code HZ7 (TEMPMATIC semi automatically controlled air conditioning in the rear passenger compartment)

1

Poly-V-belt

2

Tensioning device

Remove/install poly-V belt

S13.22-A002-79

Shown on model 447 except code HH4 (THERMOTRONIC automatic climate control), except code HH9 (TEMPMATIC semi-automatically controlled air conditioning) and except code HZ7 (TEMPMATIC semi automatically controlled air conditioning in the rear passenger compartment)

1

Poly-V-belt

2

Tensioning device

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Remove/install

1

Remove resonator box.

AR09.20-S-0010EA

2

Relieve clamping device (2) and fix in place with a 4 mm thick drill bit (3).

3

Remove poly-V-belt (1) from the clamping device.

4

Remove poly-V-belt (1).


Do not lubricate poly-V-belt (1); install dry.
The poly-V belt (1) will slip otherwise.

Installation: Observe routing diagram of poly-V belt (1).

5

Inspect the poly-V belt (1) for wear and damage.

Damage profiles for a poly-V belt

AP13.22-D-1351-01A

If there is a problem,

Replace poly-V-belt (1).

6

Install in the reverse order.

Check

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

7

Perform engine test run and check poly-V-belt (1) is running correctly.

참조 문서